Sinoran Mining & Metallurgy Equipment Co.,Ltd.
Sinoran Mining & Metallurgy Equipment Co.,Ltd.
Add to Cart
Easy operation,Hydraulic tunnelling double boom DJ-235 drilling jumbo in coal and nonferrous mine
Drilling jumbo is a mining equipment widely used in underground mining if mining is done by drilling and blasting, such as coal, lead and zinc mine. It is also used in tunnel ,culvert tunnelling, railway, highway engineering with advanced hydraulic system and anti-clamping bit device ,the rock drilling rig is a modern equipment of convenient, safe and reliable operation. Equipped with the best international brand drifter, our drilling jumbo can reach 0.8~2m/min drilling speed, and can be applied to 5.5x7.3m tunnel section.
Features
1.Hydraulic boom
Hydraulic boom with double tripod suspension for accurate hydraulic parallel holding in all directions, direct, fast, easy operation, good accuracy and accurate positioning between holes;
Telescopic boom make up of the angle when drilling the hole of bottom and top, thus no blind angle left.
Rotary actuators with high rotation torque, high load capacity.
2.Drifter
International first class drifter with high hardness, high drilling speed, low drilling tool wastage and low failure rate and etc.
3.Carrier
Sturdy, articulated carrier with four-wheel drive, powered by diesel engine, high speed and flexible transition improve the working efficiency;
Central lubrication system;
Four jacks for stable set up.
4.Control system
Hydraulically controlled drilling system which incorporates the anti-jamming function rotation pressure controlled feed(RPCF); Impact, rotation and feed adopt separate hydraulic pump, independent control loop ensure ensure the stable power output.
5.General
Automatically controlled cable reel;
FOPS telescopic protective roof;
Electrically driven piston compressor.
| Parts | Item | Unit | Main Technical Parameters |
| Main Body | Dimension | mm | 9020ⅹ1350ⅹ1638(Roof 2455, adjustable) |
| Applied section | m | 3.2ⅹ3.2~7.2ⅹ5.5 | |
| Drilling hole diameter | mm | Φ38-76 | |
| Drilling rod length | mm | 2475/3090 | |
| Drilling hole depth | mm | 2100/2700 | |
| Drilling speed | m/min | 0.8-2 | |
| Weight | Kg | 13500 | |
| Cable reel volume | M | >70 | |
| Oil tank volume | L | 340 | |
| Boom | Max. lifting angle | 55/16 | |
| Swing arm(L/R) | ° | ±35 | |
| Extension length | ° | 850 | |
| Angle of pitch | ° | 35/10 | |
| Axial rotation | ° | ±180 | |
| Max. swing angle | ° | 14/35 | |
| Carrier/Chassis | Turing radius | m | ≥6 |
| Speed | Km/h | 1.8 | |
| Ground clearance | mm | 230 | |
| Drifter | Model | 2ⅹHYD200/2ⅹHC25 | |
| Air Supply System | Air pump power | kW | 2.2 |
| Pressure for drifter | Mpa | 0.4 | |
| Water Supply System | Water pump power | kW | 2.2 |
| Pressure for drifter | Mpa | 0.8 | |
| Electrical System | Main motor power | kW | 75 |
| Service voltage | V | 380/660/1140 | |
| Motor rotate speed | r/min | 1470/2840/2840 |